Pin and Sleeve Connector · 20A 250V 2P 3W IP67 watertight · Techspan SCM320C6W
20A pin and sleeve female connector rated 250V AC with 2P 3W configuration, 6h clock position, and IP67 watertight protection for wet industrial and outdoor connections. Accepts approximately #16 to #12 AWG conductors and typical cable O.D. from 0.57 to 0.71 in (14.5 to 18 mm), helping electricians match cord and device fit before ordering.
What this product is for
This pin and sleeve connector is used to terminate portable power cable where a 20A, 250V AC, 2P 3W watertight connection is required. It is suited to industrial equipment, washdown areas, temporary power, and outdoor service where dust and water ingress protection matters.
Use for
Use for compatible IEC 60309 style 20A 250V AC devices with 2 poles, 3 wires, blue coding, and 6h clock position. Common applications include portable equipment, generators, pumps, processing equipment, and jobsite power connections in wet or demanding environments.
Avoid for
Avoid for circuits that do not match the voltage, amperage, pole-wire configuration, or clock position. Do not use where a non-watertight or straight-blade device is required, or where cable outside the listed grip range is being installed.
Best for
Best for electricians and maintenance teams needing a field-wireable female connector with IP67 sealing, screw termination, and industrial pin and sleeve compatibility. It is a practical choice when connection reliability is more important than standard residential-style cord ends.
Installed in
Typically installed on portable cord ends in factories, food processing areas, outdoor service points, marine-adjacent work areas, and temporary power setups. Typical cable outside diameter range is 0.57 to 0.71 in (14.5 to 18 mm).
Why this product exists
This connector provides a safer and more secure alternative to general-purpose cord caps in industrial environments. The IP67 enclosure helps protect the connection against dust and temporary immersion, while the keyed pin and sleeve format helps prevent mismatched connections.
Compared with similar products
Compared with IP44 splashproof versions, this IP67 model is better suited to washdown and wet locations. Compared with higher-amperage pin and sleeve devices, this 20A version is commonly selected for lighter industrial loads where a smaller connector body and matching 20A circuit are required.
Typical buying check: confirm 20A circuit rating, 250V AC system, 2P 3W configuration, and 6h clock position before ordering. Actual suitability depends on the mating device, cable type, installation conditions, and local electrical code.
Specifications
- Type: Pin and sleeve female connector
- Brand: Techspan
- Manufacturer part number: SCM320C6W
- Rated current: 20A
- Rated voltage: 208 to 250V AC
- Configuration: 2P 3W
- Clock position: 6h
- Protection rating: IP67 watertight
- Colour coding: Blue
- Wiring range: #16 to #12 AWG (1 to 2.5 sq mm)
- Typical cable O.D. range: 0.57 to 0.71 in (14.5 to 18 mm)
- Housing material: Valox
- Contacts: Nickel-plated brass
- Seals and gaskets: Neoprene
- Operating temperature: -25 degC to +40 degC (-13 degF to 104 degF)
- Standards reference: IEC 60309, UL/cUL listed
- Operating Temperature-25 degC to +40 degC (-13 degF to 104 degF)
- Housing MaterialValox
- Configuration2P 3W
- Wiring Range#16 to #12 AWG (1 to 2.5 sq mm)
- ContactsNickel-plated brass
- Protection RatingIP67 watertight
- Rated Voltage208 to 250V AC
- Rated Current20A
- Standards ReferenceIEC 60309, UL/cUL listed
- Clock Position6h
- Colour CodingBlue
- BrandsTechspan
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.