Feed-Through Terminal Block 4 mm2 26 10 Awg Screw Connection Violet · Phoenix Contact 3044607

What this product is for

This feed-through terminal block is used to terminate and join field or control wiring on standard DIN rail in panels, control cabinets, and equipment assemblies. It provides a single-level screw-clamp connection point for copper conductors in a compact 6.2 mm width.

Use for

Use for panel building, machine wiring, OEM assemblies, and commercial or industrial control circuits where 26-10 AWG (0.14-6 mm2) conductors need an organized pass-through termination point. It mounts on NS 35/7.5 or NS 35/15 DIN rail and fits Phoenix Contact CLIPLINE complete accessories for marking, bridging, and testing.

Avoid for

Avoid using this block where a fused, disconnect, multi-level, or protective earth terminal is required. Do not select it if your circuit needs a different connection technology, colour coding, or conductor range than this UT 4 VT configuration.

Best for

Best for electricians, panel shops, and OEM buyers who need a screw-connection terminal block with a 4 mm2 rated cross section, 1000 V nominal voltage, and compact DIN rail installation. The violet housing can also help with circuit identification where colour separation matters.

Installed in

Typically installed in industrial control panels, commercial equipment cabinets, building automation panels, and distribution enclosures. Typical terminal block selection should also consider end clamps, end covers, markers, and bridging accessories based on the final assembly layout.

Why this product exists

This product provides a standardized way to land and route conductors neatly on DIN rail while supporting serviceability and panel organization. Screw connection terminal blocks remain commonly used where technicians want a familiar termination method and compatibility with established accessory systems.

Compared with similar products

Compared with push-in terminal blocks, this screw-connection model suits buyers who prefer traditional screw termination and matching UT series accessories. Compared with larger terminal blocks, the 6.2 mm width helps conserve rail space while still accepting up to 6 mm2 conductors. Accessory and conductor suitability should be confirmed against the final panel design.

Specifications

• Manufacturer part number: 3044607
• Series / family: UT 4 VT
• Product type: Feed-through terminal block
• Connection method: Screw connection
• Number of connections: 2
• Level: Single level
• Rated cross section: 4 mm2
• Conductor range: 0.14-6 mm2 (26-10 AWG)
• Nominal voltage: 1000 V
• Nominal current: 32 A
• Mounting type: DIN rail, NS 35/7.5 and NS 35/15
• Width: 6.2 mm (approximately 0.24 in)
• Length / depth: approximately 46.9-47.5 mm (1.85-1.87 in)
• Colour: Violet

Dimensions can vary slightly by source listing. Confirm accessory fit and approval requirements for the intended installation.