Industrial Ethernet patch cable 5 m shielded CAT5e RJ45 to RJ45 TPE jacket · Turck U8636-5
Turck U8636-5 is a 5 m (16.4 ft) industrial Ethernet patch cable with straight male RJ45 connectors on both ends, shielded CAT5e construction, and a teal TPE jacket for demanding automation environments. Commonly used for panel-to-panel or device-to-network connections where flex life, abrasion resistance, and consistent data transmission matter.
What this product is for
This industrial Ethernet patch cable is used to connect Ethernet devices in automation panels, machinery, and industrial networks. It is a double-ended RJ45 to RJ45 cordset built for data communication in harsher plant environments than standard office patch leads.
Use for
Use for industrial Ethernet connections between PLCs, switches, HMIs, I/O blocks, and other networked equipment that use RJ45 ports. Suitable where a shielded CAT5e cable, flexible TPE jacket, and a 5 m (16.4 ft) factory-made cordset help reduce field termination time and wiring errors.
Avoid for
Avoid for outdoor direct burial, washdown exposure without suitable enclosure protection, or applications requiring a higher ingress rating at the mated connection. When coupled, this cable is rated IP20, so it is intended for protected indoor industrial installations.
Best for
Best for machine builders, integrators, and maintenance electricians who need a ready-made 5 m (16.4 ft) Ethernet cordset with shielded 4UTP x 24 AWG construction, good flex performance, and resistance suited to industrial routing.
Installed in
Typically installed in control panels, manufacturing cells, conveyor systems, packaging equipment, and automation cabinets. A 5 m length is commonly chosen where extra routing slack is needed between panel sections or between equipment frames.
Why this product exists
This cable provides a pre-terminated industrial Ethernet connection that helps speed installation and improve consistency compared with field-made patch leads. The TPE jacket, shielded CAT5e construction, and Turck molded connectors are intended for repeated industrial use where ordinary commercial patch cords may not hold up as well.
Compared with similar products
Compared with standard office Ethernet patch cables, this model is built for industrial service with a teal TPE jacket, shielded construction, and approvals listed by the manufacturer. Compared with field-terminated cable assemblies, a factory-made cordset is typically faster to install and helps reduce termination variability. Actual suitability depends on routing, bend radius, EMI conditions, and local installation requirements.
Specifications
- Manufacturer part number: U8636-5
- Brand: Turck
- Type: Industrial Ethernet patch cable
- Cable length: 5.0 m (16.4 ft)
- Connector A: RJ45 male, straight, 8-pin, shielded
- Connector B: RJ45 male, straight, 8-pin, shielded
- Ethernet category: CAT5e
- Cable construction: 4UTP x 24 AWG, shielded
- Cable jacket: TPE, teal
- Cable diameter: 7.65 mm (0.30 in)
- Rated voltage: 42 V
- Rated current: 1.5 A
- Protection class when coupled: IP20
- Cold bend rating: -40 deg
- Flame ratings: UL 1685, UL 1061
- Approvals: UL Listed, CE, UKCA, RoHS
- Special features: Flexlife and C-Track approved
- ApprovalsUL Listed, CE, UKCA, RoHS
- Cable Diameter7.65 mm (0.30 in)
- Connector ARJ45 male, straight, 8-pin, shielded
- Connector BRJ45 male, straight, 8-pin, shielded
- Rated Voltage42 V
- Rated Current1.5 A
- Cable Length5.0 m (16.4 ft)
- Cable JacketTPE, teal
- Special FeaturesFlexlife and C-Track approved
- BrandsTurck Chartwell
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.